InstallationGetting Started

 View Only
  • 1.  Unable to load zenoss core

    Posted 02-27-2017 11:39 PM

    I installed latest version of zenoss manualy as mentioned in http://wiki.zenoss.org/index.phptitle=Zenoss_Core_5_Beta/Download&redirect=no#Manual_Deployment. but I can't seem to connect to Zenoss core.

    I can access the control centre and tsdb interface on 4242 but not able to load zenoss core.
    I can't find any resolution for that, so please share on how we can fix this.



  • 2.  You should be using the

    Posted 02-28-2017 08:00 AM

    You should be using the documentation on zenoss.com. I didn't dig too deep into what you provided, but it says it's Zenoss Core Beta which would be outdated.

    Edit: That being said, you will need to go to https://zenoss5.<hostname>

    You didn't specify how you had tried to connect already.



  • 3.  �yeah followed this

    Posted 02-28-2017 09:00 AM

    yeah followed this instructions https://www.zenoss.com/sites/default/files/Zenoss_Core_Installation_Guide_r5.2.1_d1051.17.044.pdf

    >>That being said, you will need to go to https://zenoss5.<hostname>

    cant we access it with the IP

    [root@zenoss ~]# docker ps | grep 8080
    8e7608c67501 localhost:5000/c1y9qfkp7rzdde2hl6taca234/core_5.2:latest "/serviced/serviced-c" 29 hours ago Up 29 hours 0.0.0.0:32773->8080/tcp c1y9qfkp7rzdde2hl6taca234-0

    here the docker is running at32773 so it tried to access it with <-public Ip->:32773



  • 4.  It's meant to be accessed

    Posted 02-28-2017 01:00 PM

    It's meant to be accessed over port 443. There should also be a link in Control Center under the Zenoss.Core application.

    Zenoss.core zproxy vhost https https://zenoss5.<FQDN>

    You can reach Control Center by IP. At worst use your hosts file to access the site.



  • 5.  I had to add a new public

    Posted 03-02-2017 01:43 PM

    I had to add a new public endpoint under the Zenoss.core. Set the IP address and port there and was then able to access it.