Configuration & Administration

Expand all | Collapse all

Hardware OID updates

  • 1.  Hardware OID updates

    Posted 04-09-2018 12:01 AM
    Edited by Shane Quinsey 04-09-2018 12:11 AM

    Apologies in advance if this has already been asked and answered elsewhere. Unable to see anything when searching.
    I have the issue of a bunch of devices that have been added to the new platform, and hoping there is an easier way to updated.


    Unfortunately the Hardware Model needs updating as the "Device Name / OID table" appears as .1.3.6.1.4.1.9.1.1208
    Said device type - Catalyst 29xxStack

    The only way how I can see to resolve this is:
     - Update the OID based hardware model by changing Vendor to Unknown
     - Update Product Name from IOD to correct Model name .1.3.6.1.4.1.9.1.1208 = Catalyst 29xxStack
     - Wait till overnight ZenMagic, or manually remodel nodes for correct Device Name to appear (and thus update our integrated CMDb)

    This above case is for 103 routers and I have other device models to update also.
    I can see we will hit this hurdle every time a new hardware type is discovered on the network.
    Unfortunately we don't have the luxury of knowing in advance the hardware types being added to the network until we get the surprise.



    ------------------------------
    Thanks in advance.
    ShaneQ

    ------------------------------


  • 2.  RE: Hardware OID updates

    Posted 04-10-2018 01:10 AM
    03/28/2018 - ZenPack Release: Cisco Devices 5.9.0  should be the fix apparently...
    Time to back up the config just incase....

    ------------------------------
    ShaneQ
    ------------------------------