Configuration & Administration

Back to discussions
Expand all | Collapse all

Want to change Control Centers default http port

  • 1.  Want to change Control Centers default http port

    Posted 10-29-2020 12:56 AM
    I've noticed Control Centers is using http(80) and https(443) as a default port and
    I want to change this because this server will be used for other apache httpd service.
    I tried to change SERVICED_UI_PORT to other port like 1443
    and it worked for https(443) but http(80) is still active and it keeps forwarding to 443.
    I also want to change http(80) so where is the configuration for this or is there operation to change this.
    Control Center's version is the newest 1.6.3


    ------------------------------
    Takuma Fukumoto
    ------------------------------


  • 2.  RE: Want to change Control Centers default http port

    Posted 11-02-2020 04:19 PM
    • The newest control center is 1.8.0, not 1.6.3
    • I am running 1.6.5, and have also seen this behavior. The only workaround I have found is to make sure that whatever other application you want binding port 80 starts before serviced. Serviced will ignore its inability to bind port 80
    • There are other problems with changing SERVICED_UI_PORT. For whatever reason, the internal proxying done by control center's container proxy does not pick up on the fact that SERVICED_UI_PORT has changed and when parts of the zenoss application want to talk to control center, the API requests still go to port 443 on the master. This affects the following parts of zenoss:


    ------------------------------
    FirstName LastName
    CompanyName
    ------------------------------

    Original Message


  • 3.  RE: Want to change Control Centers default http port

    Posted 11-04-2020 02:34 AM
    Thanks for the reply.
    I think I should give up using 80 and 443 port.
    It sounds that I should not touch with this.

    ------------------------------
    Takuma Fukumoto
    ------------------------------

    Original Message